Installing the system board assembly

Prerequisites

Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.

Procedure
  1. If the storage cables were removed, reconnect the cables.
  2. Install the system board assembly:
    1. Slide the system board assembly into the chassis (callout 1).
    2. Install the system board assembly screws (callout 2).

    Installing the system board assembly
  3. If removed, install the internal USB device.

    Installing the internal USB device
  4. Install the chassis cover.
  5. If removed, install the security padlock and/or the Kensington security lock.

    For more information, see the lock documentation.

  6. Connect all peripheral cables to the server.
  7. Connect the power adapter to the server, and then secure the power adapter cord in the power cord clip.
  8. Connect the power cord to the AC source.
  9. Power up the server.