Removing and replacing the rack rails

WARNING:

To reduce the risk of personal injury or damage to the equipment, you must adequately support the enclosure during installation and removal.

Prerequisites
Before you begin, be sure that you have the appropriate screwdriver for the screws in the rack.
Procedure
  1. Power down the server.
  2. Extend the server from the rack.
  3. Disconnect the cabling and remove the server from the rack. For more information, see the documentation that ships with the rack mounting option.
  4. Place the server on a sturdy, level surface.
    NOTE:

    When removing the rail from the rack, always remove the front of the rail first.

  5. Open the latch and remove the screws from the front of the rail.
  6. Open the latch and remove the screws from the rear of the rail.

To replace the component, reverse the removal procedure.