Removing and replacing the LFF power switch module
Procedure
- Power down the server (Power down the server).
-
Remove all power:
- Disconnect each power cord from the power source.
- Disconnect each power cord from the server.
-
Do one of the following:
- Extend the server from the rack (Extend the server from the rack).
- Remove the server from the rack (Remove the server from the rack).
- Remove the access panel (Remove the access panel).
- Remove all hot-plug hard drives (Removing and replacing drives).
- Remove the fan cage (Removing and replacing the fan cage).
- Disconnect all cables connecting the power switch module to the system board and other components.
- Feeding the cables through the front of the server, remove the power switch module.
To replace the component, reverse the removal procedure.