Removing and replacing a DIMM

To identify the DIMMs installed in the server, see DIMM slot locations.

Procedure

Power down the server (Power down the server).
Remove all power:
1. Disconnect each power cord from the power source.
2. Disconnect each power cord from the server.
Do one of the following:
- Extend the server from the rack (Extend the server from the rack).
- Remove the server from the rack (Remove the server from the rack).
Remove the access panel (Remove the access panel).
Do one of the following:
- Remove the air baffle (Removing the air baffle).
- Remove the 4 LFF midplane cage (Removing and replacing a 4 LFF midplane cage).
Remove the DIMM.

To replace the component, reverse the removal procedure.

For DIMM configuration information, see the server user guide.