Front panel LEDs and buttons

Item	Description	Status	Definition
1	Health LED¹	Solid green	Normal
		Flashing green	iLO is rebooting
		Flashing amber	System degraded²
		Flashing red	System critical²
2	NIC status LED¹	Solid green	Linked to network
		Flashing green	Network active
		Off	No network activity
3	Power On/Standby button and system power LED¹	Solid green	System on
		Flashing green	Performing power-on sequence
		Solid amber	System in standby
		Off	No power present³
4	UID button/LED¹	Solid blue	Activated
		Flashing blue	1 flash per second = Remote management or firmware upgrade in progress 4 flashes per second = iLO manual reboot sequence initiated 8 flashes per second = iLO manual reboot sequence in progress
		Off	Deactivated

When the LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see

If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.

Facility power is not present, power cord is not attached, no power supplies are installed, or power supply failure has occurred.