Install the riser cage

CAUTION:

To prevent damage to the server or expansion boards, power down the server, and disconnect all power cords before removing or installing the riser cage.

Procedure
  1. Connect all necessary internal cabling to the expansion board.
  2. Install the riser cage. Make sure that the riser board is firmly seated in its system board connector.

    Installing the riser cage
  3. Install the access panel.
  4. Install the server into the rack.
  5. Connect all peripheral cables to the server.
  6. Connect the power cords:
    1. Connect each power cord to the server.
    2. Connect each power cord to the power source.
  7. Power up the server.
  8. If removed, install the front bezel.