Installing an HPE InfiniBand HDR/Ethernet 940QSFP 56x16 adapter
The server supports installing up to two adapters. Each adapter requires the installation of an auxiliary card.
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove power from the
server by removing the power cord. The front panel Power On/Standby button does not shut off system power. Portions of the power supply and some internal circuitry remain active until AC power is removed.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots have either an expansion slot cover or an expansion board installed.
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
The components included with the hardware option kit
T-15 Torx screwdriver
HPE InfiniBand HDR PCIe G3 Auxiliary card with 350mm cable kit
Procedure