Remove a power input module
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power input modules, and the internal system components to cool before touching them.
-
If the
server is using a single power input module only, remove all power from the
server:
- Back up all server data.
- Power down the server.
- Disconnect all peripheral cables from the server.
-
Release the power cords from the strain relief straps.
- AC power input module
- DC power input module
- AC power input module
-
For an AC power input module, do the following:
-
Disconnect the power cord from the power input module.
-
Remove the power input module.
-
Disconnect the power cord from the power input module.
-
For a DC power input module, do the following:
- Slide the power input module out of the bay just enough to access the ground cable screw.
-
Detach the ground (earthed) cable from the power input module.
-
Remove the terminal block connector from the power input module.
-
Remove the power input module.