Removing the shipping screws and brackets from a CTO server

Prerequisites
Before you remove the shipping hardware, make sure that you have a T-15 Torx screwdriver available.
  1. Remove the shipping screws on the rack ear:
    1. If installed, remove the security bezel.
    2. Remove the shipping screws on the rack ears.

    Keep these shipping screws in case there is a need to ship or transport the server at a later date.

  2. Remove the rear shipping brackets.

    Keep these shipping brackets in case there is a need to ship or transport the server at a later date.

  3. Repeat steps 1 and 2 to remove the bracket on the other side of the server.