Front drive thermal LED

The thermal warning function of the front drive health/thermal LED depends on the iLO 08-HD Max sensor reading. This function is disabled under these conditions:

• There are no drives in the front drive cages 1 and 2.
• The temperature sensor in one or more front drives has failed.

Under these conditions, iLO shows the 08-HD Max sensor reading as N/A. To view temperature sensor data, log in to iLO 4 web interface and navigate to the Information → System Information → Temperatures page.

If the 08-HD Max sensor reading shows N/A, observe the following when extending the front drive cage:

• Do not keep the drive cages out of the chassis for more than 140 sec.
• Keep the drive cages inside the chassis for at least 300 sec before extending them out again.