Dedicated iLO management module option

For more information about product features, specifications, options, configurations, and compatibility, see the product QuickSpecs on the Hewlett Packard Enterprise website.

CAUTION: To prevent damage to electrical components, properly ground the server before beginning any installation procedure. Improper grounding can cause ESD.
  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server
  3. Remove the server from the rack.
  4. Remove the access panel.
  5. If installed, remove the rear drive cage.
  6. Push the dedicated iLO management module blank out of the rear panel.
    Removing the dedicated iLO management module blank
  7. Install the dedicated iLO management module.
    Installing the dedicated iLO management module
  8. If removed, install the rear drive cage and connect the drive backplane cables.
  9. Install the access panel.
  10. Install the server into the rack.
  11. Power up the server.
  12. Enable the dedicated iLO connector.