Removing and replacing a riser board

Prerequisites

T-15 Torx screwdriver

Procedure
  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Remove the riser cage.
  6. If installed, remove the expansion board from the riser cage.
  7. Remove the riser board.

    • Primary riser cage


      Removing the riser board in primary

    • Secondary riser cage


      Removing riser board in secondary

To replace the component, reverse the removal procedure.