Removing and replacing the FlexibleLOM adapter

Prerequisites

Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.

Procedure
  1. If installed, remove the front bezel.
  2. Power down the server.
  3. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  4. Disconnect the LAN segment cables.
  5. Do one of the following:
  6. Remove the access panel.
  7. Remove the primary riser cage.
  8. Remove the FlexibleLOM adapter.

    Removing FlexibleLOM adapter

To replace the component, reverse the removal procedure.