Removing and replacing a 4-bay LFF drive backplane

Procedure
  1. If installed, remove the bezel.
  2. Power down the server.
  3. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  4. Do one of the following:
  5. Remove the access panel.
  6. Remove the air baffle.
  7. Remove all fan modules.
  8. Remove all installed LFF drives.
  9. Disconnect all cables from the 4-bay LFF drive backplane.
  10. Remove the drive backplane.

    Removing drive backplane

To replace the component, reverse the removal procedure.