Removing and replacing the Media Module adapter

Prerequisites
T-15 Torx screwdriver
Procedure
  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Remove the primary riser cage.
  6. Remove the Media Module adapter:
    1. Remove two T-15 screws.
    2. Push the latch.
    3. Remove the Media Module adapter.

      Removing the Media Module adapter

To replace the component, reverse the removal procedure.