Removing and replacing the GPU

Prerequisites

Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.

Procedure

If installed, remove the bezel.
Power down the server.
Remove all power:
1. Disconnect each power cord from the power source.
2. Disconnect each power cord from the server.
Do one of the following:
- Extend the server from the rack.
- Remove the server from the rack.
Remove the access panel.
Disconnect the cable from the GPU.
Remove the GPU holder.
Remove the primary riser cage.
Remove the GPU from the primary riser slot 1.

To replace the component, reverse the removal procedure.