LFF drive model



Item Description Status
1 UID button/LED

Solid blue = Activated

Flashing blue:

  • 1 flash per second = Remote management or firmware upgrade in progress

  • 4 flashes per second = iLO manual reboot sequence initiated

  • 8 flashes per second = iLO manual reboot sequence in progress

Off = Deactivated

2 NIC status LED

Solid green = Link to network

Flashing green (1 flash per second) = Network active

Off = No network activity

3 Health LED

Solid green = Normal

Flashing green (1 flash per second) = iLO is rebooting

Flashing amber = System degraded1

Flashing red (1 flash per second) = System critical1

4 Power On/Standby button and system power LED

Solid green = System on

Flashing green (1 flash per second) = Performing power on sequence

Solid amber = System in standby

Off = No power present 2
1

If the health LED indicates a degraded or critical state, review the system Integrated Management Log (IML) or use HPE iLO to review the system health status.

2

If the system power LED is off, verify the following conditions:

  • Facility power is present.

  • The power supply is installed and is working correctly.

  • The power cord is attached and is connected to a power source.

  • The front I/O cable is connected.

If all LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see "Power fault LEDs".