Removing and replacing the optical drive

Prerequisites

Before you perform this procedure, make sure that you have T-10 Torx screwdriver available.

Procedure
  1. If installed, remove the bezel.
  2. Power down the server.
  3. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  4. Do one of the following:
  5. Remove the access panel.
  6. Disconnect all cables from the optical drive.
  7. Remove the optical drive:

    • LFF


      Removing the optical drive in LFF chassis

    • SFF

      1. Remove the optical drive cage.


        Removing the optical drive cage in SFF chassis

      2. Remove the optical drive.


        Removing the optical drive in SFF chassis

To replace the component, reverse the removal procedure.