Removing and replacing the system battery
Procedure
- If installed, remove the front bezel.
- Power down the server.
-
Remove all power:
- Disconnect each power cord from the power source
- Disconnect each power cord from the server.
- Do one of the following:
- Remove the access panel.
- Locate the battery on the system board.
-
Remove the battery.
-
Insert the battery with the "+" side facing up on the socket, and then press the battery down to secure it in place.
- Install the access panel.
- Install the server into the rack.
- Connect all peripheral cables to the server.
- Connect each power cord to the server.
- Connect each power cord to the power source.
- Power up the server.
-
Properly dispose of the old battery.
For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized service provider.