Installing a DIMM

Procedure
  1. Power down the system (Power down the system).
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the system.
  3. Remove the system from the rack (Remove the system from the rack).
  4. Place the system on a flat, level work surface.
  5. Remove the access panel (Remove the access panel).
  6. Remove the air baffle (Remove the air baffle).
  7. Open the DIMM slot latches.
  8. Install the DIMM.

  9. Install the air baffle (Install the air baffle ).
  10. Install the access panel (Install the access panel).
  11. Install the system into the rack (Installing the system into the rack).
  12. Power up the system (Power up the system).

After installing the DIMMs, use BIOS/Platform Configuration (RBSU) in the UEFI System Utilities to configure the memory protection mode.