Set up the system
- Download the latest SPP:
http://www.hpe.com/servers/spp/download
Support validation required
- Verify that your OS or virtualization software is supported:
- Read the operational requirements for the system:
- Read the safety and compliance information on the
HPE website:
http://www.hpe.com/support/safety-compliance-enterpriseproducts
- Obtain the storage driver if needed:
Download it from the HPE support center website.
Extract it from the SPP.
Unbox the system
Rack the system
Power on the system
Update the firmware
Set up storage
Deploy an OS or virtualization software
Before you install an OS on drives connected to the HPE Smart Array P824i-p MR Gen10 Controller, configure the drives using UEFI System Utilities (F9). If the drives are not configured, the OS will not detect the drives during installation. For more information, see HPE Smart Array P824i-p MR Gen10 User Guide at the Hewlett Packard Enterprise website https://www.hpe.com/info/P824i-p-docs.