Installing a storage controller
This section only covers the installation of a storage controller board option for the internal drive cage. The front drive cage is always connected to port 1 and port 2 of the onboard controller.
Prerequisites
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove power from the
system by removing the power cord. The front panel Power On/Standby button does not shut off system power. Portions of the power supply and some internal circuitry remain active until AC power is removed.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots have either an expansion slot cover or an expansion board installed.
CAUTION:
Hewlett Packard Enterprise recommends performing a backup of all server data before installing or removing a controller or adapter.
Before installing this option, be sure that you have the components included with the hardware option kit.
Procedure
For more information about storage controller features, select the relevant user documentation on the Hewlett Packard Enterprise website (http://www.hpe.com/info/enterprise-docs).