Remove the HPE Smart Storage Battery

NOTE: System ROM and firmware messages might display "energy pack" in place of "Smart Storage Battery." Energy pack refers to both HPE Smart Storage batteries and HPE Smart Storage Hybrid capacitors.
Procedure
  1. Power down the system (Power down the system).
  2. Remove the system from the rack (Remove the system from the rack).
  3. Place the system on a flat, level work surface.
  4. Remove the access panel (Remove the access panel).
  5. Extend the front drive cages out of the chassis (Extend the front drive cages out of the chassis).
  6. Open the cable management holder, and then remove the cables from the cable management holder (Open the cable management holder).
  7. Disconnect the cable from the system board.
  8. Remove the cable from the air baffle clips, then remove the HPE Smart Storage Battery from the air baffle.