Extending the server from the rack

WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before extending a component from the rack.
Prerequisites

T-25 Torx screwdriver

Procedure
  1. If the rear panel cables are not secured with a cable management arm, do the following:
    1. Power down the server.
    2. Disconnect all peripheral cables from the server.
    3. Disconnect each power cord from the server.
  2. Disengage the server from the rack:
    1. Pull down the quick release levers on each side of the server.
    2. If necessary, use a T-25 Torx screwdriver to loosen the shipping screws.
    3. Slide the server out of the rack.

      extending server from rack