Installing the FlexibleLOM adapter

Prerequisites

Before you perform this procedure, make sure that you have the following items available:

  • T-15 Torx screwdriver

  • T-10 Torx screwdriver

  • FlexibleLOM riser cage

Procedure
  1. If installed, remove the front bezel.
  2. Power down the server.
  3. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  4. Disconnect all peripheral cables from the server.
  5. Do one of the following:
  6. Remove the access panel.
  7. Remove the primary riser cage.
  8. Remove the FlexibleLOM blank.

    Removing the FlexibleLOM blank
  9. Install the FlexibleLOM adapter.

    Installing the FlexibleLOM adapter
  10. Install the FlexibleLOM riser cage.
  11. Install the access panel.
  12. Install the server into the rack.
  13. Connect the LAN segment cables.
  14. Connect all peripheral cables to the server.
  15. Connect each power cord to the server.
  16. Connect each power cord to the power source.
  17. Power up the server.
  18. If removed, install the front bezel.

The installation is complete.