Prerequisites
Before setting up the
server:
Procedure
Unbox the
server
-
Unbox the
server and verify the contents:
- Server
- Power cord
- Rack-mounting hardware (optional)
- Documentation
The
server does not ship with OS media. All system software and firmware is preloaded on the
server.
Install the hardware options
-
(Optional) Install hardware options. For installation instructions, see
Hardware options installation.
Rack the
server
-
Install the
server in a rack.
-
Decide how to manage the
server:
- Locally: Use a KVM switch or a connect a keyboard, monitor, and mouse.
- Remotely: Connect to the iLO web interface and run a remote console:
- Verify the following:
- Using a browser, navigate to the iLO web interface, and then log in.
https://<iLO hostname or IP address>
Note the following:
In LFF chassis configuration, the iLO hostname is on the serial number/iLO information label on the top of front drive cage. In SFF chassis configuration, the iLO hostname is on the serial number/iLO information pull tab.
If a DHCP server assigns the IP address, the IP address appears on the boot screen.
If a static IP address is assigned, use that IP address.
The default login credentials are located on the serial number/iLO information pull tab.
- In the side navigation, click the
Remote Console & Media link, and then launch a remote console.
Power on the
server
-
Press the Power On/Standby button.
For remote management, use the iLO virtual power button.
-
If Intel Xeon Gold 6244 Processors are installed,
enable the enhanced cooling function.
Update the firmware
-
Using the SPP,
update the following:
- System ROM
- Storage controller
- Network controller
- Intelligent Provisioning
Set up the storage
-
Do one of the following:
Deploy an OS or virtualization software
-
Deploy an OS or virtualization software. Do one of the following:
Register the
server
-
To experience quicker service and more efficient support, register the
server at the
HPE website: