Installing the air baffle

CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot blanks, or blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.
Procedure
  1. Install the air baffle.

    Installing the air baffle
  2. If removed, install the riser cage.
  3. Install the access panel.
  4. Install the server into the rack.
  5. Connect all peripheral cables to the server.
  6. Connect each power cord to the server.
  7. Connect each power cord to the power source.
  8. Power up the server.
  9. If removed, install the front bezel.