Appliance module LEDs and components

Appliance module LEDs and components are the same for both an HPE Synergy Composer (1st gen) and an HPE Synergy Image Streamer. HPE Synergy Composer2 looks slightly different but has the same LED and components on the front panel.

Item	Description	Function
1	UID LED	Solid blue — Illuminates to locate the appliance module. Flashing blue — Indicates appliance module firmware update. Do not power off or remove appliance module when the UID LED is flashing.
2	Health LED	Indicates the health of the appliance module. Solid green — Normal operation Flashing amber — Warning Flashing red — Critical error The Health LED provides health status of the appliance module. If the Health LED indicates a warning or a critical error, connect to the HPE Synergy Console to troubleshoot.
3	Activity LED	Indicates which appliance module is active. Off — Indicates that the appliance module is the standby in a Highly Available configuration or HPE OneView is in an error state. Solid green — Indicates that the appliance module is active. Flashing green — Indicates that the reset button has been pressed and held for greater than 10 seconds, which initiates a reimaging of the appliance module. The active LED does not continue to flash green during the reimaging process.
4	Power LED	Indicates power to the appliance module. Off — No power. Verify that the appliance module is fully inserted into the frame link module. Flashing amber — The appliance module is initializing. Solid amber — The appliance module is powered off. Solid green — The appliance module is powered on.
5	Reset button	Using an applicator such as a paper clip, press the recessed button to reset the appliance module. Press and release — Resets the appliance module. Press and hold until activity LED is flashing green — Initiates reimaging of the appliance module from files on the USB flash drive plugged into the appliance module.
6	USB port	USB 2.0/3.0 port for connecting a USB drive to flash a USB recovery image.