HPE Synergy 40Gb F8 Switch Module LEDs and buttons
Item | Description | Status |
---|---|---|
1 | Interconnect link port LEDs | Solid green = Linked
Solid red = Error detected1. Off = No link |
2 | QSFP+ port LEDs | The four LEDs above each port correspond to the 10GbE or 8Gb FC channels of the port. The LEDs display one of four modes:
Ethernet mode:
PID mode:
Link/Activity mode:
Fibre Channel (FC) mode:
To switch between the LED modes, press the NEXT button. |
3 | NEXT button | Selects the QSFP+ port LED mode. |
4 | Reset pin-hole | Resets the module |
5 | UID LED/button | Solid blue = Activated
Flashing blue = Firmware upgrade in progress Off = Deactivated |
6 | Health LED | Solid green = Normal
Solid amber = No power present Flashing amber = Module degraded Solid red = A physical alignment error exists.2 |
7 | Link/Activity mode LED3 | Solid green = Link/Activity mode is selected. |
8 | PID mode LED3 | Solid green = PID mode is selected. |
9 | Ethernet mode LED3 |
Solid green = Ethernet mode is selected. |
10 | Fibre Channel (FC) mode LED3 | Solid green = FC mode is selected. |