Installing a DIMM

The server supports up to 24 DIMMs.

To install a DIMM:

Procedure
  1. Power down the server.
  2. Remove all power:
    1. Disconnect each power cord from the power source.
    2. Disconnect each power cord from the server.
  3. Do one of the following:
  4. Remove the access panel.
  5. Remove the air baffle.
  6. Open the DIMM slot latches.
  7. Install the DIMM.
    Installing a DIMM
  8. Install the air baffle.
  9. Install the access panel.
  10. Install the server into the rack.
  11. Connect each power cord to the server.
  12. Connect each power cord to the power source.
  13. Power up the server.

Use the BIOS/Platform Configuration (RBSU) in the UEFI System Utilities to configure the memory mode.

For more information about LEDs and troubleshooting failed DIMMs, see "Systems Insight Display LED combinations."