Remove Accelerator 2 from the three-slot riser cage assembly

To remove the component:

Procedure
  1. Power down the node.
  2. Disconnect all peripheral cables from the node .
  3. Remove the node from the chassis.
  4. Place the node on a flat, level surface.
  5. Remove the three-slot PCI riser cage assembly.
  6. Disconnect the accelerator power cable from the bayonet board.
  7. Remove the riser cage bracket from the three-slot riser cage assembly.
  8. Disconnect all cables from the accelerators.
  9. Remove Accelerator 2 from the three-slot riser cage assembly:
    • NVIDIA K40, K80, M60, M40, P40, or P100 GPU
      Removing NVIDIA K40/K80/M60 GPU2 from a three-slot riser
    • NVIDIA GRID K2 GPU
      Removing NVIDIA GRID K2 GPU2 from a three-slot riser
    • Intel Xeon Phi Coprocessor 5110P
      Removing GPU2 Intel 5110P from the three-slot riser
    • AMD FirePro S9150 GPU
      Removing AMD S9150 GPU2 from the three-slot riser
    • AMD FirePro S7150 GPU
      Removing AMD S7150 GPU2 from the three-slot riser