Removing the DIMMs

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static precautions before beginning any installation, removal, or replacement procedure. Improper grounding can cause electrostatic discharge.

To remove the component:

Procedure
  1. Power down the node.
  2. Disconnect all peripheral cables from the node .
  3. Remove the node from the chassis.
  4. Place the node on a flat, level surface.
  5. In a 2U node, do one of the following:
  6. Remove the air baffle.
  7. Open the DIMM slot latches.
  8. Remove the DIMM.

To replace the component, reverse the removal procedure.