Storage module LEDs
The front panel and LED layout shown in the following illustration is an example. Depending on your specific model, the LEDs might be different.
| Item | LED | Status | Definition |
|---|---|---|---|
| 1 | Drawer status1 | Solid green | Drive drawer is closed |
| Flashing green | Drive drawer is open | ||
| Flashing amber | Thermal warning, close the drive drawer | ||
| 2 | UID | Solid blue | One or more drives are being located |
| Flashing blue | Firmware flash in progress | ||
| Off | No drives are being located | ||
| 3 | Health status | Green | Normal operation |
| Flashing amber | Degraded condition | ||
| Flashing red | Critical condition | ||
| 4 | Drive status (in priority order) | Solid amber | One or more drives failed |
| Flashing amber | One or more drives are predicted to fail | ||
| Flashing green | One or more drives are rebuilding or transforming | ||
| Solid green | One or more drives are members of a logical drive | ||
| Off | No drives are configured by a RAID controller | ||
| 5 | Drawer power | Green | Storage module is in use, do not remove |
| Off | Storage module is not in use, safe to remove |
1
The drive drawer must be closed within five minutes after it is opened.