Appliance module LEDs and components

Press the UID button to illuminate the blue locator LED.

• Solid blue — Illuminates to locate the appliance module.
• Flashing blue — Indicates appliance module firmware update. Do not power off or remove appliance module when the UID LED is flashing.

Indicates the health of the appliance module

• Solid green — Normal operation
• Flashing amber — Warning
• Flashing red — Critical error

  The appliance module Health LED provides health status of the appliance module. If the Health LED indicates a warning or a critical error, connect to the HPE Synergy Console to troubleshoot.

Indicates which appliance module is active.

• Off — Indicates that the appliance module is the standby in a Highly Available configuration or HPE OneView is in an error state.
• Solid green — Indicates that the appliance module is active.
• Flashing green — Indicates that the reset button has been pressed and held for greater than 10 seconds, which initiates a reimaging of the appliance module. The active LED does not continue to flash green during the reimaging process.

Indicates power to the appliance module

• Off — No power. Verify that the appliance module is fully inserted into the frame link module.
• Flashing amber — The appliance module is initializing.
• Solid amber — The appliance module is powered off.
• Solid green — The appliance module is powered on.

Using an applicator such as a paper clip, press the recessed button to reset the appliance module.

• Press and release — Resets the appliance module.
• Press and hold until activity LED is flashing green — Initiates reimaging of the appliance module from files on the USB flash drive plugged into the appliance module.