Using the Server Health Summary

You can use iLO to display the Server Health Summary on an external monitor when the server is powered on or off. Use this feature for troubleshooting when the server will not start up. This feature can also be used to view the server IP address and other health information.

Prerequisites

  • The server has a UID button.

  • An external monitor is connected.

  • The Show Server Health on External Monitor feature is enabled on the Access Settings page.

Procedure
  1. Press the UID button on the server.
    CAUTION:

    Press and release the UID button. Holding it down at any time for more than 5 seconds initiates a graceful iLO reboot or a hardware iLO reboot. Data loss or NVRAM corruption might occur during a hardware iLO reboot.

    The Server Health Summary screen is displayed on the external monitor.

  2. Press the UID button again to close the Server Health Summary screen.