Front panel LED and buttons

Standard descriptions for most HPE ProLiant Gen10 servers are provided in this section. HPE ProLiant Gen10 server blades have a Health status LED bar instead of the Health LED described in this section.

Description Status
UID LED/button

Solid blue = Activated

Off = UID is deactivated and iLO Service Port is ready for use.

Flashing blue:

  • 1 Hz/cycle per sec = Remote management or firmware upgrade in progress

  • 4 Hz/cycle per sec = iLO manual reboot sequence initiated

  • 8 Hz/cycle per sec = iLO manual reboot sequence in progress

  • 1 fast flash and then off for 3 seconds = iLO Service Port status is Complete.

  • 4 medium flashes and then off for 1 second = iLO Service Port status is Busy.

  • 8 fast flashes and then off for 1 second = iLO Service Port status is Error.

Power On/Standby button and system power LED

Solid green = System on

Flashing green (1 Hz/cycle per sec) = Performing power on sequence

Solid amber = System in standby

Off = No power present

Health LED

Solid green = Normal

Flashing green (1 Hz/cycle per sec) = iLO is rebooting.

Flashing amber = System degraded

Flashing red (1 Hz/cycle per sec) = System critical

NIC status LED

Solid green = Link to network

Flashing green (1 Hz/cycle per sec) = Network active

Off = No network activity