Be sure that all power cords are securely connected.
Be sure that all cables are properly aligned and securely connected for each external and internal component.
Remove and check all data and power cables for damage. Be sure that no cables have bent pins or damaged connectors.
If a cable routes through air baffles or other components, be sure the cords and cables connected to the
server are routed correctly through the baffle.
Be sure that each device is properly seated. Avoid bending or flexing circuit boards when reseating components.
If a device has latches, be sure that they are completely closed and locked.
Check any interlock or interconnect LEDs that might indicate that a component is not connected properly.
If issues continue to occur, remove and reinstall each device, checking the connectors and sockets for bent pins or other damage.
For ProLiant BL c-Class Server Blades, be sure the
Onboard Administrator tray is seated properly.