GE Fanuc CMM Serial
Estimated reading time: 1 minute
Refer to these sections for details:
Supported Series
GE Fanuc CMM Serial series
Website: http://www.ge.com
PLC Connection Settings
Parameters | Recommended | Options | Notes |
---|---|---|---|
PLC Type | GE Fanuc CMM | ||
PLC Interface | RS232 | RS232/RS485 | |
Baud Rate | 19200 | 9600, 19200, 38400, 57600, 115200 | |
Data Bits | 8 | 7,8 | Must be set to 8 |
Parity | Odd | None, Even, Odd | |
Stop Bits | 1 | 1, 2 | |
PLC Station # |
0 | 0 - 255 | Not applicable |
OT Link Platform DeviceHub Configuration
To configure DeviceHub for this GE Fanuc CMM Serial PLC:
-
DeviceHub > Add Device
Type: GE Fanuc
Driver: GE Fanuc CMM Serial -
Enter details specific to your environment and click Add Device.
Device Addresses
Bit/Word |
Device Type |
Format |
Range |
Description |
---|---|---|---|---|
B |
I |
DDDDD |
1 ~ 10000 |
Input Relay |
B | Q | DDDDD | 1 ~ 10000 | Output Relay |
B | M | DDDDD | 1 ~ 10000 | Auxiliary Relay |
B | G | DDDD | 1 ~ 7680 | |
B | T | DDD | 1 ~ 256 | |
B | SA | DDD | 1 ~ 128 | |
B | SB | DDD | 1 ~ 128 | |
B | SC | DDD | 1 ~ 128 | |
B | S | DDD | 1 ~ 128 | |
W | AI | DDDDD | 1 ~ 10000 | Analog Input Register |
W | AQ | DDDDD | 1 ~ 10000 | Analog Output Register |
W | R | DDDDD | 1 ~ 32640 | Data Register |